Home / Fault codes / 0AM DQ200

0AM / 0CW · DQ200 DSG

P17BF, P189C and P1895 fault codes

These 0AM/DQ200 codes point toward hydraulic pressure build-up, pressure retention or pump-protection problems in the DSG mechatronic system. They identify the area requiring tests—not automatically the failed part.

Book DSG diagnosisSend your fault report
P17BFPump protection limit
P189CInsufficient pressure build-up
P1895Pressure restriction or drop
LeicesterSpecialist DSG diagnosis

What these DQ200 fault codes mean

P17BF: pump protection maximum limit reached

In the 0AM/DQ200 gearbox context, P17BF indicates that the hydraulic pump has reached a protection threshold. This can occur when the system runs the pump excessively while attempting to create or maintain pressure.

P189C: insufficient pressure build-up

P189C describes a function restriction because the mechatronic hydraulic system is not building sufficient pressure within the expected conditions.

P1895: pressure regulation limit exceeded

P1895 is associated with pressure restriction or pressure drop reaching its regulation limit. Complete manufacturer wording can vary, so the full scan report and gearbox identification matter.

Possible symptoms

  • Gearbox warning message
  • Failure to select a gear
  • Loss of drive or reverse
  • Intermittent limp mode
  • Hydraulic pump running frequently
  • Fault returning after clearing

Diagnosis

How Car2Code approaches the fault

01

Confirm

Identify the gearbox and record complete codes, freeze-frame information and symptoms.

02

Measure

Assess pressure build-up, retention, pump behaviour and electrical supply.

03

Repair and verify

Address the confirmed cause, complete required setup and retest the system.

0AM / DQ200 questions

Frequently asked questions

What does P17BF mean on an 0AM DQ200 gearbox?

It indicates that the hydraulic pump protection maximum limit has been reached. The reason the pump is working excessively still needs to be established.

What does P189C mean?

P189C indicates a function restriction associated with insufficient hydraulic pressure build-up in the DSG mechatronic system.

Can Car2Code diagnose these faults in Leicester?

Yes. Send the full diagnostic report and vehicle registration, then arrange an appointment at 43 Abbey Gate, Leicester.

0AM gearbox showing P17BF or P189C?

Call Car2Code